I prefer type of work - Part-Time, Contract
Basis. Expecting remuneration in terms of Project Cost of appx. Rs.2000 Per Hour.
My Skill - Specialised in project execution,installation,testing,commission,manpower supervising,maintenance,etc.
My prefered location for assignment - Anywhere, Allahabad, Bangalore, Karnataka, Mysore
I as a company deals in - siemens vfd,daikin chiller,abb motors,honeywell fire alarm,etc. .
Jobs handled -
COMPANY NAME : ABB LTD
DESIGNATION : SENIOR ELECTRICAL ENGINEER
DURATION : 02.09.2013 – PRESENT
*Supervision during new transformer installation and shifting of transformer to load center.
*Supervision during new intermediate pole erection.
*Supervision during Extension of New 11 KV lines.
*Supervision during Extension of New L.T. lines.
*Supervision during restringing of existing LT lines.
*Supervision during installation and commissioning of new RLMS box.
*Able to assist or instruct engineers,electrician and wiremen.
* Preparation of Project Planning, scheduling and Monthly Progress Reports.
*Supervising earthing system installation,LT protection kit installation,Horngap fuse unit installation,AB switch installation and Lightning arrestor installation.
COMPANY NAME : ZAMIL INDUSTRIES – SAUDI ARABIA
DESIGNATION : ELECTRICAL ENGINEER
DURATION : 21.07.2011 to 05-08-2013
Supervision during HVAC CHILLER PANEL,VFD PANEL, LV SWITCHGEAR,MCC PANEL AND DDC PANEL installation.
Contractor co-ordination during testing and commisioning of HVAC LV SWITCHGEAR/MCC PANEL AND DDC PANEL.
Supervision during installation of hvac control devices like motorized fire damper actuator,flowswitch,temperature transmitter,moisture transmitter,pressure differential switch,pressure gauges,temperature gauges etc.
Supervision during local control panel and disconnect switch installation of hvac units.
Supervising cabletray work and conduit installation work as per approved drawing.
Supervision of control cable and power cable laying/termination work as per approved cable schedule and cable interconnection diagram.
Experience working on Package units, Split units, Window type A/C, water cooled chillers,fcu units,fan filter units,pressurization pumps,exhaust fans,fresh air fans,propeller fans,air cooled chillers,ahu,phe vfd panel,chilled water secondary vfd panel,chemical dosing unit,auto ball tube cleaning system,cooling tower,pumps,dol and star/delta starter with bms compatibility,vrv units,hiwall units and vfd bypass panels.
Measurement certification of cables,cabletray and hvac panels with client.
Take off Quantities from Autocad and Input into Excel.
Studying the drawing using autocad.
Supervision during insulation resistance and continuity test of control cable and power cable.
Reading electrical design specifications and technical drawings.
To follow up with vendors and consultants regarding Engineering activities and coordination with the vendors for timely manufacturing and the delivery of equipment to the site. Inspection of Invoices after delivery of material to site.
To take part in site inspection and preparing reports and documentation of site inspection.
Liaising with and monitoring third party contractors
Able to assist or instruct electrician and wiremen
Quantity survey of materials utilized in hvac project.
Contractor co-ordination during Quality survey of completed work in hvac project and also punchlist clearance work.
I gain this above mentioned experience while working in industrial project(BOSCH),powerplant project(SEC/PARSON BRINKHEROFF) and also multispeciality hospital project(ASTER) having more than 500 beds.
COMPANY NAME : ETISALAT FACILITY MANAGEMENT - UAE
DESIGNATION : ELECTRICAL ENGINEER
DURATION : O7/01/2009 – 20/06/2011
• Installation,Testing and Commissioning of following equipments such as rectifier,diesel generators,LV panels,switchgears,capacitor banks,access control panel,cctv camera system,revolving door,aircraft warning light,AMF panels,battery banks,ac/dc powerplant etc.
• Installation,Testing and Commissioning of fire alarm and fire fighting system.
• Practical knowledge in fire pumps,booster pumps,chiller control panels,earthing system and relay lighting panels.
• Experience in installation of AC and DC power distribution boards.
• Experience working in building management system.
• To monitor every day Site Execution work progress & Preparation of site progress report to submit customer to meet customer satisfaction with proper safety at site i.e. overall site work monitoring.
• To mobilize vendor / contractor at site.
• Liaising with and monitoring third party contractors.
• Able to assist or instruct electrician and wiremen.
• Supervision during preventive maintenance,emergency maintenance and corrective maintenance of electrical equipment.
• Experience in calibration of main sensing relay,generator sensing relay and also mobile generator sensing relay.
• Practical knowledge in auto transfer switch,phase monitoring relay,earth leakage relay and over/under voltage relay.
• Practical knowledge in earth leakage circuit breaker,2p/3p/4p miniatuire circuit breaker,moulded case circuit breakers,motorized breaker and also air circuit breaker.
• Contractor co-ordination during cabletray installation.
• I have office work experience using MAXIMO for preparing monthly overtime report.
• I have worked in abudhabi international airport in facility management division as a FM engineer in security system.Main duties of this position is troubleshooting and repair work and startup of X-RAY machines(rapidscan make),VDGS(visual docking guidance system),cctv,metal detectors,conveyors etc.
• I have worked in abudhabi media company in 2454 studio of john buck international(JBI) facility management division as MEP engineer.Main duties are supervising of PM,CM,EM,CNTM of equipments like earthing system,fire fighting system,emergency lighting system,normal lighting system,fire alarm system,pdb,mdb,smdb,diesel generator,lighting relay panel,elevator,escalator,Q-management system,sliding door,revolving door,aircraft warning light,etc.
• Arranging a team for attending callout.I have experience in creating workorders using maximo for PM,CM,EM,CNTM,PW.I attended training program of PDA.I have experience in supervising asset verification and barcoding work of electrical equipment by using PDA.
COMPANY NAME : INDIA BUILDERS CORPORATION - FM
DESIGNATION : ELECTRICAL ENGINEER
DURATION : 04.08.2005 – 05/01/2009
I was working as electrical project engineer in INDIA BUILDERS CORPORATION in their project named platinum city which is a high rise building construction projects having more than 22 floors.
• Supervision during lv panel and switchgear panel installation,maintenance and repair.
• Contractor co-ordination during testing and commissioning of lv panel and switchgear installation.
• Experience working in water and sewage treatment plant(WTP/STP).
• Supervision during SMDB and MDB installation.
• Supervision during installation,maintenance and repair of lighting distribution board,power distribution board and hvac distribution board.
• Supervision during lighting relay control panel installation,maintenance and repair.
• Supervising the installation of electrical busbar riser.
• Supervision during fire fighting system installation,maintenance and repair.
• Contractor co-ordination during testing and commisioning of fire fighting system.
• Supervision during wiring and cable termination of lighting system,power system as per approved drawing.
• Supervision during cctv camera and automatic sliding door installation,maintenance and repair.
• Contractor co-ordination during installation,maintenance,repair,testing and commisioning of diesel generator.
• Contractor co-ordination during capacitor bank and auto transfer switch installation, maintenance and repair.
• Contractor co-ordination during ups installation,maintenance and repair.
• Supervision during access control system,intruder alarm system etc installation,maintenance and repair.
• Supervision during conduit and cable tray installation as per approved drawing.
• Contractor co-ordination during installation,maintenance,repair,testing and commissioning of fire pumps and booster pumps.
• Take off Quantities from Autocad and Input into Excel.
• Contractor co-ordination during elevator and escalator installation,maintenance and repair.
• To coordination with site regarding Erection and commissioning of equipments as per protocol and final documentation for handover of project.
• To managing the project operations with a view to ensure timely accomplishment of project targets within the time and cost parameters.