Machine Monitoring System
Following is the tentative requirement for prototype of Machine Monitoring System,
The system shall be used at an ambient temperature. But shall be placed in a machine where temperature can go up to 85 Degree Centigrade.
The selection of material is very important and critical and performance of material should be fast, industrial grade and heavy duty.
The system shall be used for monitoring only and not control.
The system shall record six (6) temperatures plus one (1) Temperature of Ambient. Total Seven (7) Temperatures.
Two Digital inputs of levels shall be used.
It should record Locations of machine.
These data are to be displayed at remote location and maintained in a database for future.
The time interval of getting data in user defined, say 60 minutes under normal circumstances.
We the fault condition in either of the parameter, the Parameters are shown urgently with alert showing on Fault Parameter(s).
The example of faults are like Rise of Temperature above user defined value say 65 deg Centigrade, Low Level of Oil or Change of Location (beyond 30 meters, in case of theft of machine)
Under normal circumstance, the data is shown and recorded on computer and in case of fault, the data is shown as alert in computer followed by sms/email.
The scope shall include design of PCB, General purpose PCB, Power supply, Enclosure (Box), connectors for sensor, etc, if required.
The system should operate on AC Supply, 220 to 250 VAC.